文章来源:聚丽企业
作者:阳光板厂家-聚丽板材
发布日期:2019年7月24日

PC board properties transmission of light Anti UV
PC plate adopts the way three-lay co-extrusion production, surface covered with high
concentrations of uv absorber, and can keep long-term weathering resistance. It can
keep good physical properties in40℃~120℃.PC板采用三层共挤方式生产,表面覆盖一层高浓度紫外线吸收剂,并可以保持长久耐候。板材在-40℃~120℃可保持良好物理特性。
Sound Insulation
The hollow structure and the polycarbonate are good noise characteristic, can effectively
reduce the noise.中空结构和聚碳酸酯有良好的隔音特性,能有效地降低噪音。
Light weight
Corrugated board is the weight of the thickness of the glass with the weight of 1/12, save
costs and human building structu中空板的重量是同厚度玻璃重量的1/12,节省建筑结构成本和人力。
Easily Installation
Can be used generally carpentry tool cutting or special equipped with special tools, minimal
bending radius is thickness of 175 times, can install suitable for all kinds of cold bending
modelling.
可用一般木工工具切割,无须专门配备专用工具,最小弯曲半径为板厚的175倍,可冷弯安装适合各种造型。
High high-translucent, depending on different colour, euphotic rate can reach 25% ~ 82%.高透光性,视颜色不同,透光率可达25%~82%。
High Impact-resistance
Hollow plate impact strength is made of glass as much as 80 times, in installation
and use process is not easy to damage. 中空板的冲击强度是玻璃的80倍,在安装及使用过程中不易损坏。
节能 energy efficiency
Heat transfer coefficient is low (K) values and thus has excellent insulating performance
compared. With the same thickness of glass energy saving potential up 1.7 times. 传热系数低(K值),因此拥有极佳的隔热性能。与相同厚度的玻璃
相比节能潜力高达1.7倍。
耐侯性 weather fastness
The accelerated aging test 40 hours later, YI is 2, LT only reduce 0.6%,
remain high light transmittance, low yellow variable degrees in ten years.加速老化测试4000小时后, YI为2, LT仅降低0.6%,证明在使用
10年后仍然保持高透光率,低黄变度。
耐燃性 flame resistant
Sunlight multilayer board accords with GB8624-2006 standard, for "flame resistant"
(B - s2 vd0).
Sunlight多层板材符合GB8624-2006标准,为“难燃”(B-s2,vd0)。